二氧化碳资源化技术研究进展

过量的二氧化碳(CO2)排放可导致温室效应的不断加剧,因此CO2减排受到越来越多的关注,其中将CO2转化为附加值较高的化工产品,即CO2资源化利用技术不仅可实现CO2减排,同时具有一定的经济效益。CO2资源化利用技术主要包括光化学还原法、电化学还原法和催化转移氢化法等。重点介绍并总结了以上3种方法的特点、优势和不足,指出未来需研究解决的关键问题和研究方向,为实现高效的CO2资源化利用提供借鉴和参考。     

Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

CePO4-TiO2固溶体的NH3-SCR活性

采用共沉淀法合成了不同Ce与Ti摩尔比的CePO₄-TiO₂复合材料,利用XRD、TEM、NH₃-TPD和H₂-TPR技术对其物理化学性质进行了表征,并对其NH₃-SCR活性进行了评价。实验结果表明：随着CePO₄含量的增加,催化剂的活性提高;当Ce与Ti的摩尔比为8:2时催化剂的活性最高,230 ℃的NO转化率达到100%,且具有更广的温度窗口,优于纯CePO₄。表征结果显示,CePO₄与TiO₂形成固溶体后,颗粒尺寸较为均匀,强酸位的数量增多,氧化还原性能提升,从而提高了催化剂的SCR反应活性,同时改善了其抗水抗硫性能。     

腐殖酸对砂质土壤吸附Cr(VI)的影响

利用系列摇瓶振荡实验,研究了在砂质土壤介质中腐殖酸(HA)对Cr(VI)还原作用及增强土壤表面对其吸附的影响.通过改变反应接触时间、pH值、HA投加量等条件,确定了最佳吸附反应条件.结果表明:砂质土壤中存在HA时,可使Cr(VI)还原为毒性较小的Cr(Ⅲ),明显增强土壤对可溶态Cr离子的吸附能力,比同等条件下无HA的土壤吸附量增大1倍以上.一般整个反应过程约8 h即可达到稳定.pH值对Cr的还原和吸附有很大的影响,酸性条件下的吸附量比碱性条件可增大1倍,最佳pH值为2～4;当pH＞5时吸附能力急剧下降,pH=10时吸附去除量降为20%.有HA存在时砂质土壤土对Cr(VI)的吸附反应为一级动力学反应,K298=0.033 5 min-1,砂土对CrO2-4的等温吸附曲线较好地满足Langmuir公式.     

基于生态分区的我国湖泊营养盐控制目标研究

为更好地控制我国湖泊的富营养化水平,在五大湖泊生态分区的基础上,对不同生态分区的100个湖泊总氮(TN)、总磷(TP)、TN/TP与叶绿素a(Chl-a)的关系进行了分析,进而提出了不同生态分区的湖泊营养盐控制目标.结果表明,五大湖泊生态分区中,东北湖区富营养化水平最低,华北湖区富营养化水平最高,近几年五大湖区湖泊富营养水平呈上升趋势.从TN、TP对五大生态分区湖泊Chl-a浓度的影响看,TP是东北和华北湖区湖泊藻类生长的限制性营养盐,而TN和TP同时是中东部、云贵和蒙新湖区湖泊藻类生长的限制性营养盐.从TN/TP判断,在TN/TP<10的湖泊中,除华北湖区外的其他4个湖区湖泊Chl-a均受TN显著影响;TP仅对东北、蒙新湖区湖泊的Chl-a有显著影响.在TN/TP>17的湖泊中,除蒙新湖区外的其他4个湖区湖泊Chl-a均受TP显著影响,而在中东部、云贵和蒙新湖区,TN对Chl-a也有显著影响.在10相似文献   

氨对垃圾焚烧飞灰浸出特性的影响及地球化学模拟

垃圾焚烧飞灰可能因为选择性非催化还原法(SNCR)脱硝过程中氨泄漏、垃圾携带的渗滤液受热挥发等原因而吸附氨.本研究中采用人为添加氨水,在pH为3.66～12.44范围内,研究氨对飞灰中溶解性有机碳(DOC)和重金属浸出的影响,并利用地球化学模拟软件Visual MINTEQ从金属化学形态分布上分析氨对飞灰浸出的影响机制.结果表明,DOC在pH>9和有高浓度氨(≥1 357 mg·L-1)存在时,其浸出量大幅增加,而在浸出液中氨的水平不高于537 mg·L-1时则受氨的影响很小;在pH<6时,飞灰中各金属主要以自由态的金属离子和金属-氯络离子形态大量溶出,且受氨的影响较小;而在pH为8～12的碱性环境中和氨浓度较高时(≥3 253 mg·L-1),氨与金属生成了可溶性的金属-氨配合物,能显著增加Cd、Cu、Ni、Zn的浸出,且在pH=9附近时浸出量达到最大值,但氨对Al和Pb的浸出影响甚微;在pH>12时,Cd、Cu、Ni、Zn主要以羟基金属离子形式存在.在氨浓度为3 253 mg·L-1时,通过利用Visual MINTEQ模拟浸出值与试验数据的对比,发现Al、Pb、Zn的浸出主要由溶解/沉淀模型控制,而Cd、Cu、Ni由溶解/沉淀模型和表面吸附反应模型同时控制,且Visual MINTEQ模型能较好地预测飞灰中Al、Cu、Pb、Zn的浸出特性.     

Effects of environmental temperature on the thermal runaway of lithium-ion batteries during charging process

Lithium-ion batteries with relatively narrow operating temperature range have provoked concerns regarding the safety of LIBs. In this work, a series of experiments were conducted to explore the thermal runaway (TR) behaviors of charging batteries in a high/low temperature test chamber. The effects of charging rates (0.5 C, 1 C, 2 C, and 3 C), and ambient temperature (2 °C, 32 °C and 56 °C) are comprehensively investigated.The results indicate that the cell exhibited greater thermal hazard at the high charging rate and ambient temperature conditions. As the charging rate increased from 0.5 C to 3 C, more lithium intercalated in the anode prompt the TR triggered in advance, the TR onset temperature decreased from 297.5 °C to 264.7 °C. In addition, the charging time decreased with the elevated ambient temperature, resulting in a relatively higher TR onset temperature and lower maximum temperature, and the average TR critical time declined by 115–143 s. Finally, the TR required less heat accumulation with increasing of charging rate and ambient temperature, and the heat generation of side reaction played a substantial role that accounted for approximately 54%∼63%. These results provide an insight into the charging cell thermal runaway behaviors in complex operation environments and deliver valuable guidance for improving the safety of cell operation.     

大连星海地区环境空气中挥发性有机物的臭氧生成潜势研究

以该实验的观测资料为基础,通过数据分析表明,对大连星海地区OH自由基消耗的主要环境VOCs组分是烯烃类物质,对O3生成潜势贡献最高的环境VOCs组分是芳香烃类物质;综合LiOH及OFP值评价,识别影响大连星海地区O3生成的关键环境VOCs反应活性物种为丙烯、甲苯、间对二甲苯等物质。     

我国防灾减灾领域学科发展及其专业设置——从学位管理制度谈起

我国高校在防灾减灾类人才培养中存在一些现实困境,如:灾害学的学科地位较低、防灾减灾类学科及专业设置不灵活、学校管理制度及其相关条例的约束等。从我国学位管理制度谈起,通过比较分析国内外高校专业设置与交叉学科发展情况,探讨我国防灾减灾领域学科发展及专业设置对防灾减灾人才培养造成的影响,并提出三点建议:一是加大我国学位管理制度的改革,确保落实高校办学自主权;二是对灾害科学的研究走向系统化、社会化,发展国内高等学校防灾减灾类专业本科教育;三是防灾减灾类专业课程设置从横向和纵向上都要体现综合和交叉的学科属性。     

脉冲强光对水中枯草杆菌灭活效果的研究

脉冲强光杀菌技术是近年来开发的一种新型冷杀菌技术,利用强烈的白光闪照进行杀菌。以枯草杆菌为目标微生物,对比研究脉冲强光与紫外线对微生物的灭活效果。并通过改变脉冲强光装置的输入电压和闪照次数,研究了影响脉冲强光杀菌的影响因素。